The diameter range of the steel cable drums that can be used for steel cable drum brackets is: 600mm-3800mm. Users can choose the appropriate cable to put the wire frame according to the diameter and tonnage of the steel cable drum. Putting racks, cable putting racks, mechanical padding racks, hydraulic padding racks, wire rope stalls, trapezoidal pads, spiral padding racks, buying wire racks, large pyramids
Uses: Putting racks are mainly used to support steel cable drums. When using, put on the shaft rod into the hole in the middle of the steel cable drum, and then use the thread to stand up at the ends of the shaft rod to expand the line.
Manufacturing process: Putting the wire rack is welded by the national standard steel pipe, the coating is static and plastic, and the bottom is equipped with a foot wheel, which is convenient to move. The main force parts use high -frequency processing to ensure the durability and sufficient strength of the product.
Product advantages: simple operation, sturdy and durable, easy improvement of steel cable drums, flexible movement, good stability of the line.
The cable putting frame is divided into use: steel cable drum brackets, cable axes, cable storage brackets, etc.
According to the form of promotion, it can be divided into a hydraulic cable, and the mechanical cable is placed.
According to the use and structural form, it is divided into, adjusted hydraulic pads, column -type thread brackets, top rod -type cables, horizontal steel cable drum frames, scoopplane cables, disassembled cables put lines The frame, the tension set the line frame.
According to the load capacity, it is divided into: 3T cable placing racks, 5T cable placing racks, 10T cables placed wire racks, 15T steel cable drum shaft brackets, 20T steel cable drum brackets and larger tonnage cable plates.