1. Solid wood cable disk loading
The cable must be checked before transportation, the cable should be intact, and the solid wood cable disk is not allowed to be built. The flat lying will make the cable wrapped and loose, and it is also easy to damage the cable and solid wood cable disk. The cable seal should be tightly; the inner and outer end of the cable and the oil pipe between the oil -filled cable and the pressure box should be fixed on the plate to avoid being loose and loose during transportation; the oil supply valve on the pressure box The state should be opened, and the pressure indicates normal; the outside of the cable should be protected to prevent external objects from damage. If the problem is found, it can be installed and transported after handling it.
2. Solid wood cable disk roll
When the solid wood cable is rolled on the ground, it must be controlled within a small distance. The rolling direction must be *** according to the direction shown on the side of the solid wood cable (along the tight direction of the cable). If the reverse scroll will retreat and loosen and fall off.
3. Unloading of solid wood cable disk
If there is no lifting machinery when unloading the truck, the solid wood cable is prohibited from pushing down immediately from the transportation vehicle. Because it is immediately pushed down, not only the solid wood cable disk is damaged, but also the cable is also easily damaged by mechanical equipment. Compared with small and medium -sized solid wood cable plates, wooden boards can be paved with steep slopes, and then pulling the solid wood cable plate with rampant or ropes to gradually roll down along the steep slope. Several dishes are prohibited when loading and unloading solid wood cables.
Precautions For Transportation Of Solid Wood Cable Disks.
Apr 01, 2024 Leave a message
Send Inquiry




