Wooden Cable Drum And Attachment Storage Requirements

After the cable and its accessories are transported to the construction site, they are generally transported to the warehouse for storage and placement. Some are used as spare parts or other reasons. When the cable and its accessories are stored, it must be kept properly to prevent damage and affect use, so pay attention to the following points.

(1) Wood cable drums must not be placed flat. When the outdoor -to -oil -filled oil cable is placed, there should be a housing to avoid indirect sunlighting cables, and to avoid mechanical damage and loss of attachment.

(2) The model, voltage, specifications, and length of the cable should be marked on the cable axis. There should be channels around the wooden cable drums to facilitate inspection. The foundation should be solid, and the drums of wooden cables should be stable.

(3) The oil pressure of the oil -supplying cable increases or decreases with the rise and fall of the ambient temperature. When storing, the oil in the pressure box should have a certain capacity to ensure that when the cable is at the highest environment, the oil pressure should not be less than 0.05MPa. Essence

(4) In order to avoid the insulation attachment and data used by the cable terminal and the use of the two -headed joint, the dull room should be sent to the boring room. The insulated paper roll of the oil -filled cable should be well sealed.